anyone that brings a NSX to my shop will get $5.00 off there smog.
shop is
auto masters smog test only
4533 telephone rd
ventura ca 93003
I only work tue-friday 8 to 5.
Yeah when I activate the solenoid it does sound like a hiss noise, not sure how you keep the fluid from the solenoid from getting back in the pump. I would open the solenoid a few times open close open close ect. Then run the pump to suck it back down since it’s all clean. Brad im Located in So...
first I bleed the system taking out the relay and using a jumper wire, run the pump for 20 sec and then open the nipple ( with a hose running into a bottle) do that a few times then, I unplug one solenoid at a time activating them. The first three I did, I only heard a little click noise and...
Seems like you know alot about this
Ok I thought everything was good after I bleed the solenoids. Last night when I left work started pumping again. I did the solenoids thing again and sound like compressed air then I bleed the actuator and little air came out. But can’t seem to...
I was able to bleed Solenoids today and the first 3 I did look fine no foam, when I got to the last one sounded like air was in it but still no foam, drove it around the block and lock it up a few times level was fine, and no more noises...
I have a question on this, My 91 will not stop pumping everytime I let it set for longer then a hour, then I have to lock it up to shut it up. I did bleed the abs but didn't do the solenoids thing. When I did bleed the system it would be good for like a 4 or 5 days then I would have to lock up...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.