Search results

I have a 1991, all original, with R12. My Ac dryer was leaking from the viewport seal, bubbling slowly. I got a new dryer. I evacuated the system, and left the gauges on over the weekend and the pressure kept at -30inHG. Now a yearish later, the a/c has lost pressure again. It still had...

This may sound a bit OCD, but Im looking for a cleaner to clean up my Titanium key. Simple Green does not do much, and Brasso works better, but how do you get in the grooves to clean it up? Toothbrush? Ultra sonic cleaner? Thanks in advance, Dean

I have a small leak in the sight glass of my drier. R 12 is leaking, I mean barely leaking. I was looking for another drier for the future down the road, and my question is this: Do I need to find the OEM drier, or is there a substitute? I have seen a bunch of them that "say" they are...

Mine is starting to look a little faded, and wanted to rejuvenate the plastic trim. Is there anything someone has used to bring it back to life? - Dean

I have a 91, and have never added r12 to it. I have had her since 05. The air has slowly gotten warmer in the last 15 years, and this year it was a little too hot. Found a couple of cans of r-12 on craigslist, bought a manifold gauge set, added 1 can, and now its at 60 degrees from the vent...

What size is the push screw pin for the carpet in the trunk? I snapped a couple when I was trying to make a jumper wire for the break light. Also, are there some knockoffs someone has used?

I never realized it was suppose to have one. Never bothered me till I found out. I doubt anyone has one lying around, so has anyone got an idea of how to make one? I can use a rubber hose, cut to length, but it does not quite look right.

I know this is a dumb question, but I just got the window regulator fixed on the passenger side and have a question about the drivers side switch for the passenger side window. Is the drivers side passenger window switch recessed more than the passenger side window switch. Mine is, and I...

I have a 91 NSX, with the arm rest that has never had a false bottom, and you can see the screws when you open it. Has anyone made, or found a substitute for it. I know I could fold up a piece of cloth or something, but I figured I would ask you guys in case someone has come up with something...

So the battery is dead and I start charging it. When I walk to the back of the car, the break lights and the lights on the wing are on. I cant figure it out. I got on the floorboard to look at the pedal, and found about seven little blue pieces of plastic, with one in a cone shape??? I cant...

I have been looking for a new radio for about 2 years now and cant seem to find one. What should one cost in working condition?

I just replaced my coolant reservoir and dropped one of the bracket screws down in the bay. I have looked for it for 2 days now and its driving me nuts. Didnt know if one of you guys had one laying around. It has a washer on it as well that wont come off. I know this is trivial, but just...

Car wont hold a charge after a couple of weeks, common problem. My question is my voltage on the dash reads 13.5 is that a little high?

Mine has a pin hole crack on the seam. Did not know if it was repairable or worth it. Have some time with the holidays coming up if you can. Also, whats the difference in the 2 hoses on the tank. The larger and smaller one seem to go almost to the exact same place. Thanks in advance

Looking for a tank in good condition.

Talked to you today on Roswell Rd. If you get this you understood what I was saying. Welcome.

My regulator is slow, and i want to get it rebuilt. I know where to get it rebuilt, but I want to know all options. I have removed all the hardened grease in the past and re greased both windows. Passenger is still pretty slow. My question is 1. Do I just try to remove the motor or the...

I have a T- Bleeder wrench, and i have bled the ABS before, as well as exercising the solenoids. Now the problem. The Anti-Lock light came on yesterday. The pump kept running for about 2 minutes then shut off. Thats when the light came on. I just bled the ABS. No problem. I pulled off the...

My Bad

Im putting on custom leather seats, and removed the passenger seat leather without tearing it up. The head rest is torn though. I would say it is a 7 out of 10 in condition with no bolster wear. Im not sure anyone would want this, but if you do, I can send it to you.

I just put on new rotors, and I realized to front rotors are in a different direction of the rear. What is the correct direction they should be going. Slot going forward, or slot going towards rear? Do they both need to be going in the same direction?

Can I get the rear caliper tool from any auto parts store. They tool that you turn clockways to screw in the abs piston. If not any other Ideas on how to screw it in.:confused:

I guess that says it all. I just got the Stacys side skirts, from Stacy, and the front lip from I tuner. Any shops you would trust out there?

I used search, but kept running into dead end. Is a 91 radio compatable with a 96. Arent all years the same, to swap the radios from one to another?

Thats what I need. Let me know.:biggrin: