Yes thank you guys. And CL65 Captain I've changed all four drilled/ slotted rotors with HPS on my RX7 and didnt have to go thru any bedding process. Stops like it should. I've also never used Stoptech Rotors before and never done any brake change on a NSX before. I was just confused, but I'll...
ABS started chattering for 10-15 secs barely moving pulling out of the driveway. 2nd time it started chattering was roughly around the same speed. Just rolling.
Ha, yes fight as in Pedal is hard and still no power brake. Stops like a 60s vehicle equipped with drum brakes as comparison.
Will again I've only drove it around the corner twice and braking was just too much so I return. The front rotors looks new like it should. The rear however does appears to have some kind of smeared.
Front:
Rear:
Yes I did remember Bryan telling me that the rotors need to be clean. But he didn't mention soap and water. He just mention brake clean, so that's what I did. I'll try the bedding and possibly clean it some more tomorrow...
No Bryan at SOS told me to just clean it with brake Cleaner.
I mean I've installed numerous of HPS pad and new rotors and it'll stop right on the spot. Never really have to go thru bedding process. The only time I had to bed the pads was when I had Brembo BBK installed in my 3rd Gen Rx7.
But...
Yes the rotors I used two cans of brake cleaner and scrubbed all the dirt/ grease whatever it was on the rotors.
The HPS brake pads I did not. I've never had to file it and bed it when using them..
Really?? I've had HAWK HPS on my 3rd Gen RX7, my dodge Viper GTS and I can assure you it doesn't feel anything like this.
The review Of the HPS on here seems pretty reliable that's why I went with them.
And I bought it from SOS cause they recommend it for street driving also.
I'm just...
I also recently just painted my wheels however using the wheel paint in a can from Napa. Results were very nice.. Hopefully it last long.
But dang bro you seem like you had to do a lot of work? What I did was I just pulled off the wheels, prepped it, and used flash cards. Tucked the flash...
I should note ABS light never came on.
-I did checked ABS fuse and pulled them out to check continuity and everything seems fine.
-Fluid was @ the low in the ABS reservoir and I did topped it off to the max line.
-When bleeding the brakes (started with the furthest away from the master...
Ok so I recently did a brake job.
-All new four Stoptech Slotted rotors and Hawk HPS brake pads.
1st test drive: Before I pulled out of the driveway I noticed the driver side front started chattering/ clicking (ABS). Prior to the brake changed, it has never done this. Anyways I Took it down...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.