Search results

Car Information Year: 1993 Type: NSX coupe Transmission: 5-Speed Exterior color: Red Interior color: Black Odometer: 46,105 M VIN: JH4NA1151PT000163 Price: 18,000 OBO Car History Title History: Current title is branded. Accidents: No Owners: 2...

After 6 years I finally got my car running again. This time the results were 564whp on 91 pump gas using an Eaton TVS 1900 supercharger with intercooling as measured on a dynapack dyno. There's probably another 30-40 hiding behind a slipping S/C belt and undersized (stock DC sport) headers...

Has anybody intentionally (or not) advanced the intake cam(s) one tooth (about 16 crank degrees) without interference issues? Thanks, Mark.

Just wondering how many cars have been converted to dry sump and what issues/problems might have occured? Here's some pictures of my drysump system.

I'm looking for a good (fair/honest/qualified/hopefully into NSXs) residential building contractor in or about the Lake Matthew’s area in Riverside County to build my new workshop. The shop will be approx 2000 sq/ft conventional construction, completely finished inside. I have drawings...

I'm looking for a good (fair/honest/qualified/into NSXs) residential building contractor in or about the Lake Matthew’s area in Riverside County to build my new workshop. The shop will be approx 2000 sq/ft conventional construction, completely finished inside. I have drawings, structural...

I recently procured a Ginken LSD (stock ring) from one of the usual NSX speedshop suspects. However, I've been told that Ginken is redesigning the entire unit. I've read that the Ginken can be a bit noisy unless very thick gear lube is used but if you can live with noise it's otherwise a good...

Set of 6 RC SL9-440 (440cc) and set of 6 SL9-550 (550cc) Injectors. In great condition. $250 per set.

Oversized stock front rotors, calipers and mounts with SS brake lines. All in good shape to upgrade early model NSXs. $400. You pay shipping (it's heavy!) Email [email protected].

Here's a concept for twin turbos housed inside the engine bay. The design requires a fabricated intake with integrated Laminova core plenum. Core design shown is good for over 800 RWHP as are the turbos. Engine bay and glass are modeled in to check for interference.

Folks, I'm finally back to designing a new forced induction system. I'm looking for a new challenge so that eliminates turbos as it's been shown that these can make huge power gains despite poor design and engineering execution. No slam, but with a big enough turbo the sky's the limit (at...

Just checking to see if there's a demand for aftermarket upper and lower "A arms". I see quite a few posts looking for these pieces and I know they are rare (if straight) and expensive. I can reverse engineer the stock parts and fabricate them in chrome moly or machine out of billet alum...

Hi Phoenix NSX'ers. I've recently retired from Boeing in LA and moved out here to Gold Canyon. Now I've got time and could use a few extra bucks, so if you need work done on your NSX give me a call and let's talk. I can do the work or simply assist you with technical instruction while...

Not sure what year Honda switched to the larger front rotor and caliper but I have a used set with SB lines. Fits all models I think, for sure anything with oversized front wheels. $350. Mark

I’m tying to figure out had to add full time piston squirters to my block. In theory, it looks pretty easy. Just drill a small galley from the main bearing webs directly into the main bearings oil supply groove, just like a Porsche. The two end webs would handle the front and rear cylinders...

Have a set of late model (larger) stock rotors and calipers with SS lines. $600OBO.

With Comptech out of the S/Cer business I've been re-thinking my decision not to market a S/Cer kit. If there was enough interest in a relatively low cost ($5k or less) low boost (5 lbs) Eaton based system I might consider it. The layout would be based on my current design without the IC and...

For anyone looking at buying a used NSX you'd be well advised to check out the parts catalogs shown on this site and look at the prices of some of the typical maintenance items as well as some of the usual suspects associated with high mileage cars. Most will be shocked! I'd say any price you...

Guys, Do you think a supercharger (or any FI system) adds value? I added my GM kit to my project track car in the marketplace and everyone who's responded says it decreases (or adds no) value to the typical NSX buyer.

Brand new, still in box, 3.0 heads (front and rear). Includes valves, springs, seals, cams, cam caps, rockers, rocker shafts, lost motion, all brand new. Just bolt them on and go. Cam gears not included. $3000 firm. Mark at [email protected] Used set for $1000 firm (includes all parts...

Why spend $25K for a complete NSX just to strip it down, add a cage, put wide fenders and tires and track it? Don't make the mistake I did. Putting a bunch of money into a street car to track it can reduce resale value significantly, a double whammy! if you're serious about tracking/racing a...

Decided not to build my track only NSX, no time. Therefore I have a complete front suspension, complete Motor/Trans, and complete rear suspension for sale. I also have ALL other parts for an entire NSX but I'm only interested in selling the big ticket items for now (i.e. items you would...

Just as you see them. Drivetrain, stock 92 engine with approx 105K miles but still strong. 5 speed with short gears and pinion. Comptech toe rods. Just drop yours out and bolt mine up. $8000. Front suspension $2000. Shipping paid by buyer. Mark in Los Angeles. 562 461 7625

Got a NSX that been hit in the front or rear (or both) and the insurance company won't fix it? Buy it from them and sell it to me and make a few bucks in the process. Mark

I'll be tube framing my track NSX so the front and rear clips will be available. If interested let me know so we can negotiate where to make the cuts. I'll be keeping everything between the front and rear firewalls and the frame rails up to the first subframe bolt holes. $2000.00 per clip...