• Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.

Search results

  1. tpearsall

    New Black Tow Hook Cover for a 1991 - Maryland

    Black front tow hook cover. This is new and was purchased to fit a 1991, but I think it fits through 2001 but please confirm. $35 shipped obo.
  2. tpearsall

    Speed Bleeders

    I have new front and rear speed bleeders that I bought for my '91. According to the SpeedBleeders.com web site they'll fit '91-'97 (they don't mention anything about '98 on). $25 shipped in the US. Thanks, Todd
  3. tpearsall

    Dali Racing Seat Cushion Replacement for Sale - Black

    Used but in perfect condition. I can post pictures over the weekend. I don't think it has the 5th belt hole, but I'll check. A must for tall drivers or not so tall drivers with a helmet on. http://www.daliracing.com/v666-5/catalog/index_browse_part.cfm?focus=447 $125 - Todd
  4. tpearsall

    Safest/Best Way to Do A Long Distance Sale

    What is the best way to coordinate a long distance sale? My car is on the east coast and the buyer is on the west coast. The buyer is taking care of the shipping arrangements and costs, but how should I do the money/car/title exchange? He is going to wire me a deposit, but I'm not sure where...
  5. tpearsall

    Brand New Carbotech Panther Plus Front Pads

    New in original box, Carbotech Panther Plus front pads for 1991 or similar. $100 Shipped to lower 48 states. Todd 410-499-0710 === Added 6/24/03 === I just opened the box to check out the pads in preperation to sell and they looked small for front pads so I checked the CarboTech parts...
  6. tpearsall

    Bra and seat cushion

    Bra and Dali Seat cushion - $220 Dali leather seat cushion (black) 6mos old, perfect shape (buys you about 2” headroom) - $90 Nose mask 3mos old, used twice, minor scrapes on bottom of each side.. -------Pics of Nose Mask Todd 410-499-0710
  7. tpearsall

    1991 Black/Ivory For Sale

    - Asking $29,900 - Black with ivory interior - VIN: JH4NA1155MT003157 - Excellent condition - 100% stock except for items listed below - 90k mi - OEM clutch < 1000mi - 60k/90k service, timing belt, water pump and Comptech oil pump done 7mos ago - New trunk and engine compartment struts - Master...
  8. tpearsall

    Not Smooth getting into 1st and Reverse

    I just had my master and slave clutch cylinders, clutch release fork and hanger replaced and a Centerforce clutch installed. Since then it is tougher to shift into 1st and reverse, not so hard that I'm jamming or grinding to get it in, but definately not the smooth slide it used to be. I'm...
  9. tpearsall

    Trying to Track Down a Trans Part

    Does any know who might have in stock Part No# 22825-PR8-000? It is a hanger in the 5-speed trans that connects or is related to the clutch release fork. It is currently back ordered from Honda until 7/6 and is leaving my car stranded at a dealership in Syracuse, NY after a track session at...
  10. tpearsall

    Need to make a quick decision on Short Gears

    My tranny is about to come a part for a clutch and while I'm there taking care of the snap-ring issue. I'm trying to decide about short gears (w/o the R&P) while they in there. LarryB had good recommendation to drive a car with short gears to see what I like, but I won't have time since I want...
  11. tpearsall

    NSX-T on Baywatch

    After some clutch trouble at Watkins Glen Tuesday morning I spent Wednesday bored out for my mind in a Syracuse hotel hoping the local Acura guys could get me back on the road to Baltimore that night. As I mindlessly searched bad daytime TV I got sucked into Babewatch (which was half way...
  12. tpearsall

    Watkins Glen Thanks

    I want to thank all the NSX folks at Watkins Glen May 5th and 6th for the help and advice on my 1st track event followed by my flatbed trip out from the track :(. Also, thanks to LarryB for the telephone diagnosis with help of my discriptions such as: - The metal piece that bolts on to the side...
  13. tpearsall

    Keyless Entry w/Light Flash

    I put a factory keyless entry in my '91 a few months ago. Over time the lack of indication that it locked is bothering me (as I frequently go back and check if locked - paranoia) I'm planning do the brake light flash modification as outlined here: http://www.nsxhelp.com/diy2/headlightflash.pdf...
  14. tpearsall

    Any DC Area locals going to Don Gallo's River Run or Watkins Glen?

    Are there an VA/DC/MD Area Locals going to Don Gallo's River Run April 26th or Watkins Glen May 5th and 5th? (They are NSXCA NE events) I'm trying to work my scheudule to attend one or preferrably both and checking to see if anyone wants to caravan. - Todd
  15. tpearsall

    NSX See It's 1st Snow

    Unfortunately it didn't like the snow and went right back into the garage. [This message has been edited by tpearsall (edited 17 February 2003).]
  16. tpearsall

    NSX Key Chains

    Anyone know where to find NSX key chains? All I've seen are the tiny nsx models on a chain (not for me) and the Dali one. Are their any other options others have come across? Thanks.
  17. tpearsall

    Replacing Burned Out Dash Light

    I have a burned out instrument panel light so I opened up the dash to get to replace it. After all the effort to get there I decided I'm going to replace them all in hopes of not going through that again anytime soon. Anyway, I found 3 large bulbs, 2 medium sized (they were the ones burned...
  18. tpearsall

    Bad Fuel Guage Sender?

    Does this sound like a bad fuel gauge sender? When filling the tank the gauge goes to full, but heads to empty too soon and inconsistently. I've been down below an 1/8 of a tank remaining on the gauge with anywhere for 4 to 8 gallons left. Right now it is at 1/2 with about 14 gallons left...
  19. tpearsall

    Replacing Headlight Bulb

    Is the stock headlight bulb in a '91 and standard bulb I can get from Pep Boys (or similar) or is it a special/dealer order item? Thanks, Todd
  20. tpearsall

    Front License Plate

    Is the standard front license plate (yuck) mounting just 2 holes in the front bumper? I'm concerned it's not the right way and the plate will tear off messing up the bumper. I may go to the Dali bracket http://www.daliracing.com/v666-5/catalog/gotta_have/front_license_bracket.cfm?focus=604...
  21. tpearsall

    WTB: Axles

    Looking to buy preferably rebuilt or otherwise good condition axles. - Todd
  22. tpearsall

    Trans replaced, but has a snap-ring range S/N?

    I bought a '91 with 82k miles that is in snap-ring range last week, but it is in such great shape inside and out I took a chance on it. Since I bought it from a dealer I don't have any of the maintainence records on it and wanted to see if the 60k or 90k had been done. I knew the general area...
  23. tpearsall

    NSX's in MD?

    Will be pickig up my Black '91 this week!!I've only seen one (red) in the Columbia area in the past 6 months. - TP
  24. tpearsall

    Better Deal

    To follow up to my highs miles question... Assuming similar condition, do you think I'm better off with: 1) Red '91 w/80,000 miles (not in snap ring range) or 2) Red '93 w/110,000 miles Both are ASKING around $29k. Thanks again, Todd (Soon to be a 1st time NSX owner)
  25. tpearsall

    100k Plus Miles

    What's the comfort level people have in buying an NSX with over 100,000 miles on it? There are several '91-'93 around in the 100k - 130k range that would leave me with some spending money for repairs, upgrades, food, etc. or I could go for the more typical 60k-80k variety. Should a NSX with...
Back
Top