Recent content by fox32223

***SOLD*** YEAR & MODEL (NSX or NSX-T): 1999 NSX FULL VIN #: CURRENT MILEAGE: 54,900 COLOR (EXT/INT): Silver/Black TRANSMISSION: 6spd Manual LOCATION OF VEHICLE (CITY/STATE): Jacksonville, Fl CONTACT VIA (E-mail, PM, phone number, etc.): [email protected] PRICE (MUST STATE A PRICE, IS IT...

I have finally fixed my issue. The sensor up in the grill area was unpluged. Is that a outside air temp sensor? Once that was plugged in all the stalling problems went away.

Larry - you are right. As the resident plastics engineer here, i concluded a few years ago it was exactly that, a release agent in the rubber to allow it to be ejected from the mold during manufacturing.

I already have one on CD, but I wanted a different perspective from someone who actually knew what they were doing. The manual sometimes leaves out the small details. Thanks for your input. Fox

Thank you so much!

I need to do a timing belt replacement. Several years ago I saw a document on here that had a step by step instruction on replacing a timing belt. I can't find it in the WIKI, can someone point me in the right direction? Thanks! Fox

I'm in the southeren part of Jacksonville called Switzerland. What kind of info are you looking for? Send me a PM.

I have this same exact problem. Did you ever get a solution? Thanks, Fox

Hey guys, I have been researching the site looking for my answers and can't quite seem to find them. I suspect the TW sensor on my 99 coupe is going bad, and I would like to test it and replace if necessary. I have the 97-05 manual on CD and I can not find the location of were this sensor is...

I had the same exact problem with my 92 Legend. I replaced the VSS and problem went away. I havn't seen it in my NSX, but if I did, I would suspect the VSS. Fox

Mine is a hybrid as well!

There are two things this could be both have already been mentioned. 1. Mold Release Agent 2. Bloom Only an chemical analysis will be able to determine what it is. The problem is that there not enough material to do the test. Rest assured, whatever it is, it's not a problem. Your Friendly...

FYI....I spoke with the sales manager at Acura of Orannge Park Florida today and he has been told it will have a mininum 500 HP and price has not been determined yet. It will have AWD and he says the high hp will be though a supercharger. He tells me that AOP sells more NSX's than any other...

The carpeting wasn't fitting very good so as I began to look into why, I found that the carpet was coming unstapled from the plastic molding that clips onto the body. Those staples are VERY heavy duty and the plastic molding is designed in such a way I can't see how a standard type stapler...

I always run mine to the fuel light. Each and every time the tank will take 15 gallons at fill up, and since the tank holds 18 gallons so I still have an additional 75 miles on the tank until it runs dry. It made me very nervous the first time, and now I don't even think about it.