AEM MAP sensor

Joined
Sep 5, 2000
Messages
684
Location
PA
This weekend I want to change my MAP sensor to the AEM 3.5bar map sensor, so I can move up the boost. Can some one help me, what wires to tap in to?

The OEM has: one white| one green white |one yellow white

AEM has: one white| one red |one black

Does anyone know how they connect?

Thanks,
Dave
 
Joined
Jul 13, 2001
Messages
593
Location
Woodstock Ga. N of Atlanta
KTan- the white wire is signal (ouput) , the white/yellow is power (input) and green is ground. So, black goes to green. Red goes to wht/yellow. White to white. If you wante to test this, you should have 5volts between the green and wht/yel. Green is a signal ground for all ecu connectors.

HTH
MB
 
Top