Car won't start after remote start install

[jet3000gt]

Hi all. Having a problem with my 97 Nsx turbo with ems series 2. Got remote start installed and works but the installer drained the battery by having the key in. So he charged the battery and now it won't start. Thanks for any help.

 

[jaffaz32]

Have you charged the battery if it's drained?

But i had a similar problem.

Do you have any electrics at all? open the doors, do the lights come on?

Does the car try to start when you turn the key or is there nothing at all?

 

[jet3000gt]

Charged the battery. Have Lights and all but it won't crank. Looks like no spark. Just had the car dynoed for my turbo with new plugs. Walbro pump. Injectors. Aem series 2 installed. Drove like a beast.

 

[Grimeas]

Maybe be a bad installer that hacked up the wiring harness

 

[NA1MT]

I'm gonna guess it has to do with the alarm wiring.

 

[Ramirez428]

check the starter wire on ignition harness and the alarm. Also check the clutch switch, it has to be temporarily or permanently bypassed for it to remote start. Only two on the top of my head i can think of that would prevent it from starting that would be related to the alarm.

 

[chrisbailey13]

a bit late to the thread, is the car turning over?

 

[jet3000gt]

He found the problem. He remote started it a few times and flooded the plugs. Starts and drives now. Thanks