For those with front/rear "H" badges?

[I_M_Legend]

I’m about to place an order with amayama.com so will tell you. May try to find someone else trying to order to not get killed on shipping.

Did you ever order these? What part# did you go with?

 

[Soundeffects]

How do you line up the front badge in the exact correct spot?

 

[I_M_Legend]

If I got this center garnish, will the red plastic lens match the red on my 99 USDM NSX-T? The description mentions tinting.

https://www.thensxshop.com/exterior/na2-japanese-spec-rear-center-garnish-tail-light

 

[I_M_Legend]

Would 75701-S6M-Z01 fit better for the front since it has prongs?

https://www.amayama.com/en/part/honda/75701s6mz01


75701-S1A-E11ZB does not have prongs

Both appear to be 80mm x 65mm

 

[NSX_n00b]

If I got this center garnish, will the red plastic lens match the red on my 99 USDM NSX-T? The description mentions tinting.

https://www.thensxshop.com/exterior/na2-japanese-spec-rear-center-garnish-tail-light

It should be pretty close. The JDM Tails from 2002 onward were not tinted like the pre 2002 ones. The only difference would be if your 99 USDM Tails have seen a lot of sun the red might be slightly faded compared to a brand new center tail.

Would 75701-S6M-Z01 fit better for the front since it has prongs?

https://www.amayama.com/en/part/honda/75701s6mz01


75701-S1A-E11ZB does not have prongs

Both appear to be 80mm x 65mm

Would it fit better? Do you mean would it be better supported? Sure. But keep in mind the hole size on the emblem could be bigger and/or the distance between the holes could be different on the emblem than on the front bumper. I think you're better off getting the one without prongs IMHO and if need be just add an extra piece of 3M tape.

 

[I_M_Legend]

Does anyone know the part# to this center garnish with the "H" logo?

 

[NSX_n00b]

Does anyone know the part# to this center garnish with the "H" logo?

I think it's 75522-SL0-J61

 

[I_M_Legend]

I think it's 75522-SL0-J61

Ok I think I may have found it. Looks like #75520-SL0-023 is for:

View attachment 155055

While #75522-SL0-J61 is for:

 

[NSX_n00b]

Ok I think I may have found it. Looks like #75520-SL0-023 is for:

Whoops, copy and paste error. Sorry about that. Glad you found it though.

 

[ekhonda87]

I hate to bump this old thread, but it looks like pictures are not showing up for me, so I am having difficultly understanding the difference between 75520-SL0-023 and 75522-SL0-J61. My understanding is that both of these center lights are for 02-05 tail lights. The -023 part number is the standard silver H logo, while the -J61 is the RED FILLED H logo. Can anyone confirm this is correct?

 

[Honcho]

This is correct and it is because the J61 is for the NSX-R, while the 023 is for all other NSX trims.

 

[ekhonda87]

This is correct and it is because the J61 is for the NSX-R, while the 023 is for all other NSX trims.

Thank you so much, Honcho!