Anyone else have trouble fitting the rear cover once removed for service? I wrestling with it to get it to lay flush. It's winning at the match at the moment.
Isn't it more like a mounting bracket that's attached to the wiring harness. I put it under the stand-off. That seemed like the the way it wants to go but obviously not.
It does go under the stand off, but it must fit over the nut. If you look at the nut carefully you will see the hex shape is not all the way to the top of the nut. The top 1/8" is round. The harness plastic piece has a hole that must fit over the nut so it is flush so the standoff goes all the way down.
A mirror can be handy to see if this is positioned correctly.
HTH,
LarryB