Rear diffusers...let's see them!!!

[MetalSpikeRacing]

Hey guys,
I am planning on going with a center exit exhaust and would like to see what are the options out there for diffusers.

Custom made or from any of the famous shops let's see them all,

show them off.

-MSR

 

[Oyagi]

Here's my Taitec JGTC rear diffuser with Taitec Center Exit exhaust:

 

[naokiend]

I like this.
<img src="http://carview-img02.bmcdn.jp/minkara/photo/000/001/679/872/1679872/p7.jpg">

<a href="http://minkara.carview.co.jp/userid/219977/car/110738/1679872/photo.aspx">from here</a>

 

[Oyagi]

Oh I like that, too bad the rear plate messes it up so much.

Here's one I like as well, I's Impact, on Scorp's car. It should accomodate the center-exit as well:

 

[Oyagi]

Suddenly I was hit with deja vu and realized someone posted a smiliar topic last week:
http://www.nsxprime.com/forums/showthread.php?t=130882&highlight=i's+impact

 

[Texas91Brent]

I like this.
<img src="http://carview-img02.bmcdn.jp/minkara/photo/000/001/679/872/1679872/p7.jpg">

<a href="http://minkara.carview.co.jp/userid/219977/car/110738/1679872/photo.aspx">from here</a>

Looks like custom painted and modified MargaHill piece.

 

[greenberet]

Not just custom made - homemade on the kitchen table:

 

[Sandro]

Can we see it little better?Other picture.

 

[RYU]

Route KS

 

[greenberet]

Can we see it little better?Other picture.

You can see a lot of pictures here (Homemade complete rear undertray / diffuser) before I painted the top and sides black. Since I painted it black, you can't really see it very well anymore, which is what I wanted.

 

[HIJACKER]

I like this.
<img src="http://carview-img02.bmcdn.jp/minkara/photo/000/001/679/872/1679872/p7.jpg">

<a href="http://minkara.carview.co.jp/userid/219977/car/110738/1679872/photo.aspx">from here</a>

Exactly what I'm looking for. Where do I find - where can I buy? :biggrin:

 

[NSXAMG996TT]

I also have the Taitec CF rear diffuser. The consensus from the track community is that it's non-functional. Oh well, at least the driver behind me can see my pretzel exhaust.

 

[MetalSpikeRacing]

Taitec diffuser should be easier to acomodate a custom exhaust.
Thats what I will be getting, plus it looks pretty dramatic.

Any turbo guys using the Taitec diffuser?

-MSR

 

[Oyagi]

There's a local nsx owner here who's also an aerodynamicist and according to him, as long as you have a completely flat underbody, the taitec diffuser will be functional. It may not have the gradual up sweep seen in the JGTC cars but Tsuchiya (who both owns and races an nsx) thought the taitec diffuser was a noticeable improvement over the stock bodywork.

 

[c.e.harris3]

Route-ks

 

[transdzn]

Exactly what I'm looking for. Where do I find - where can I buy? :biggrin:

Seriously. That looks nice! I would guess it's around $3K for shipping and customs .

 

[GT Theory]

Seriously. That looks nice! I would guess it's around $3K for shipping and customs .

It looks like to run that rear bumper/valence you need to remove your rear bumper beam and foam, a little scary if you get rear ended. However, it does look awful nice, maybe its worth the risk...

 

[FXMDBilly]

We ran the Taitec diffuser before designing our own. Sorry for the bad angle:

 

[Veleno]

It looks like to run that rear bumper/valence you need to remove your rear bumper beam and foam, a little scary if you get rear ended. However, it does look awful nice, maybe its worth the risk...

The beam and foam do not need to be removed for the Marga Hills pieces (or the copy), so no worries on that note.

 

[davidf]

Route-ks

Very nice.

 

[RacingHeart]

Exactly what I'm looking for. Where do I find - where can I buy? :biggrin:

Its heavily customized... the original MH piece does not have the center tunnel nor the nice transition between the spats and the diffuser (just above the ex. tips).

Here's my Marga Hills:

 

[GT Theory]

The beam and foam do not need to be removed for the Marga Hills pieces (or the copy), so no worries on that note.

Well in that case I retract my previous statement. I was looking at the white NSXR GT pictured above and thought perhaps the bumper beam was removed to make the rear bumper work. I thought I remember reading in another thread that to use the GT one version you had to remove the bumper beam, but I could be completly wrong.

 

[c.e.harris3]

Seriously. That looks nice! I would guess it's around $3K for shipping and customs .

I live in Japan and I can get at regular price I doubt it would be more than $1500 shipped

 

[BLKVEGASNSXT]

just had this custom made diffuser with diablo style center exit exhaust installed by Uehara Motorwerks, las vegas.

 

[GT Theory]

just had this custom made diffuser with diablo style center exit exhaust installed by Uehara Motorwerks, las vegas.

Looks like the diffuser from the BRS widebody.

[/url][/IMG]