Wheel fitment question???

[xnsx]

Does anyone know if the wheel specs below will fit a NSX without rubbing or sticking out? I don't want to shave off my hubs or extend my fender if I can avoid it. Thanks.

F: I have a choice of 17x7 +35, 17x8 +30, or 17x8 +31
R: 18x10 +37

Which do you guys recommend for the front?

 

[synth19]

It all depends on your tire size / ride height / camber. This setup can work, but many variables at play here.

 

[xnsx]

Thanks synth19. Can you give me some recommendations? I rather your expertise. This will go on a stock NSX. I plan on dropping it alittle with coilovers.

 

[Brylek]

Both, front and rear are on the aggressive side and will not clear unless you will be running massive negative camber.

This thread has lots of useful information:

http://www.nsxprime.com/forum/showthread.php/46639-Ultimate-NSX-wheel-guide!

 

[JW]

This is what I have on my car and they are fairly flush with the fenders.

- front - 17x8 +40 offset

- rear - 18x9.5 +40 offset

Tires are 205/40/17 front and 255/35/18 rear



91 NSX Red/Black

 

[jmarksnsx]

^ Joe is your car lowered at all?

 

[JW]

^ Joe is your car lowered at all?

No it isn't. I have H&R lowering springs for it, but hesitant to install as I'm not sure if I would be able to get out of my driveway.

Joe


91 NSX Red/Black