Hi there,
Over the past few years there has been a rash of NSX Harmonic Dampers delaminating, the balancing weight separates form the back of the damper body and cuts through the timing belt cover, into the timing belt. This can happen so quickly you won't have time to figure out what that...
Cedar Ridge Fabrication Front Compliance Clamps, $192!!!! CYBER MONDAY SPECIAL
You all know the Front Compliance clamps Cedar Ridge Fabrication has been making for the past 13 years. The clamps lock the front compliance joint that can often make the NSX steering feel vague. End result is...
Cedar Ridge Fabrication CAMBER CORRECTION rear bearings/toe links $640!!!! CYBER MONDAY SPECIAL
The camber correction parts we have been making continually for over 10 years at the lowest price in years.
Rear Beam Bearing set
These will allow you to reduce the rear camber by 1-1.2 degrees...
Cedar Ridge Fabrication Short Shift Kit, $45!!!! CYBER MONDAY SPECIAL
The most popular part we have ever made at the lowest price in years.
Short shift kit shortens the forward and backwards shifting throw by approximately 25% while not effecting the side to side movement which Honda got...
Cedar Ridge Fabrication Harmonic Shield $50!!!! CYBER MONDAY SPECIAL
Super deep discount on a must have NSX part.
The Cedar Ridge Crankshaft Damper Pulley Shield is installed behind the crankshaft pulley as an added layer of protection between the factory crankshaft damper pulley and the...
I am working on engine compartment/shock tower braces too. The coupe is designed and ready for building! They will match the stainless steel tunnel brace, using the oval shaped tubing for great strength and rigidity. I need to find a CT Targa chassis brace to template off so the targa brace...
Hey all, I'm sure everyone is aware of the benefits of the Cedar Ridge Fabrication timing belt shield. By far the cheapest bit of insurance one can add to their NSX to prevent damage from the OEM damper de-laminating. Here is Richard Graves talking about his experience on his personal car...
I've decided to resurrect the old Dali Racing chassis tunnel brace I designed for MJ back in 2005. The brace bridges the tunnel, in front of the gas tank, mounts with existing fasteners. I am making a small batch of 25 of them so I'm guessing they will go fast and you will want to pre-order...
Hey there, Some of you may have seen this on FB where one of my shields saved Joe's motor:
https://www.facebook.com/groups/nsxowners/?multi_permalinks=690691561126257&comment_id=690694324459314¬if_t=like¬if_id=1502736705471316
Seems like a good time to offer a discount so EVERYONE will...
Hey there,
It's spring and we are all thinking about getting our cars back on the road. Doing a little maintenance, changing oil, perhaps that timing belt and water pump you have been putting off all winter. We just ran a big batch of timing belt shields so here is a chance to get one of those...
Hey folks,
We all know OS Giken is the best in the business and building differentials, smooth operation with amazing holding power for high HP cars. Durable, tune-able and rebuild-able down the road with service and parts available.
http://osgiken.net/rt-5522-techology.html
I'm getting ready...
Hello,
You all know the Front Compliance clamps Cedar Ridge Fabrication has been making for the past 12 years. The clamps lock the front compliance joint that can often make the NSX steering feel vague. End result is better steering response, more stable cornering and improved control when hard...
These hangers allow adjustment in the height of your exhaust so your tips can match the cut outs in your rear valance. They can be adjusted from 32-62mm, the stock rubber hanger is 42mm in length. They are a simple part with rubber isolation on both ends so they will still be quiet in...
The Cedar Ridge Fabrication Harness Bar
The Cedar Ridge Harness Bar is a direct fit harness bar solution for the NSX. Featuring a unique billet machined bracket, does NOT require drilling into the B pillar panels for mounting. The design allows full movement of stock or aftermarket seat slides...
CT rear beam bushings came out of a rear beam, in good condition ready to press into your beam.
$250+shipping
Check out my SOS rear toe links, get both for a complete rear suspension upgrade.
SOS rear toe links in good condition, they are used but the rod ends are still tight.
$150+ shipping
PM if you want these, check out the CT beam bushings I have for sale for a great deal on a whole rear suspension.
I was digging through a box of NSX parts and found a pulley I made for my 1.6L SC before I went to a 2.1L SC.
81mm in diameter with extra tall outer lips to help retain the belt.
Direct bolt up to a 1.6L SC, has 6 ribs and will align with a 5 rib pulley run on the inner 5 ribs.
$200
We finally got caught up and made some extra harness bars, it's been years since I actually had these in stock!
NSX harness bars that can be installed without needing to cut your interior, they do not restrict movement of the seats as well.
Same old price $795, plus free ground shipping for...
We have been making support plates and hardening front and rear motor mounts for rears. I finally came up with a new design, easier to make and a better part as well. Gives a larger volume for the Urethane so they will be more stable over time, saves 2 parts in each set so they cost less and...
New SOS motor mounts, buy them for $250 ----with exchange.
https://www.scienceofspeed.com/index.php/nsx/enpp/external-engine-components/scienceofspeed-sport-engine-transmission-mounts.html
Front motor mount
Rear motor mount for MANUAL trans
$250 for the set...quite the deal!
- - - Updated -...
Hey all,
It's that time of year when we are all thinking about annual maintenance and if you're thinking about timing belt and water pump it's a good idea to put a timing belt shield in place too. Cheap insurance for the off chance that the timing belt damper should come apart(...and they do)...
Hey all,
We have been making adjustable sway links for a number of years and they have worked very well. The only way we can make them better would be to seal them against the weather and allow users to grease them to keep them quite and extend their life.
After 3 years of searching I have...
The first thing Cedar Ridge Fabrication became know for was our performance focused NSX suspension upgrades. Since we are sponsoring NSXPO 2015 track day we are offering some packages of our suspension parts at a discount.
$440 Rear Beam Bearing set, regular $480 installed in your beam(or...
Hi there,
Over the past few years there has been a rash of NSX Harmonic Dampers delaminating, the balancing weight separates form the back of the damper body and cuts through the timing belt cover, into the timing belt. This can happen so quickly you won't have time to figure out what that...
Hey there,
It's been a while since I made a batch of these. I have decided to sponsor the NSXPO 2015 track day and donate a harness bar to NSXPO raffle to help raise funds for the event. I figured I should make a batch of them. I'm getting quotes on parts at this time and hope to be able to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.