-
Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.
Custom Comptech Supercharger Kit + Intercooler + Big 80mm TB + AEM INFINITY EMS & Mor
Dyno #?
- Joined
- 13 December 2011
- Messages
- 1,934
Dyno numbers will always vary in the Dyno brand, air temp, altitude etc.
Car made 365HP / 430HP very conservative tune, running LOW / HI boost, with HATCH CLOSED, Mustang DYNO. Instant power delivery as you should expect, through the whole rpm range.
Car was also tuned on a fairly hot day (95 degrees). Lots of factors play into a dyno run, not just the parts themselves. The intercooler kit can drop the AIT's 20-30 degrees easily when its on, and more if you were to add a water meth kit.
Car made 365HP / 430HP very conservative tune, running LOW / HI boost, with HATCH CLOSED, Mustang DYNO. Instant power delivery as you should expect, through the whole rpm range.
Car was also tuned on a fairly hot day (95 degrees). Lots of factors play into a dyno run, not just the parts themselves. The intercooler kit can drop the AIT's 20-30 degrees easily when its on, and more if you were to add a water meth kit.
Last edited:
- Joined
- 13 December 2011
- Messages
- 1,934
I HAVE A BUYER FOR THE HEAT EXCHANGER / WATER PUMP SETUP -
FULL KIT WITHOUT THE EMS STUFF & HEAT EXCHANGER SETUP - $7500 + Shipping / PP.
- Comptech 1.6 Supercharger Kit - Blower was completely rebuilt in 2016 by JB Performance, still under warranty. All internals seals, couplings etc. replaced, and impellers polished & balanced.
Includes low and hi boost pulleys.
- Custom Laminova Water to Air Intercooler Kit - Custom intake manifold - Top mount design - 12AN water inlets / outlets
- RC 550cc Injectors, with custom vibrant AN fuel lines, AEM Fuel Pressure Regulator
- Custom Aluminum Air Box / Dual ARC filters, 3.5"
- Rebuilt alternator from AES, all couplers upgraded to silicone
- Cedar ridge locking S/C belt tensioner
- AEM Air Temp sensor & Fuel Pressure sensors
* I do have an extra engine-bay mounted aluminum reservoir tank for the intercooler, that sits where my oil breather tank is currently. I can include this for $100 extra. I also found my old front mounted radiator (heat exchanger), $100 for this as well.
FULL KIT WITHOUT THE EMS STUFF & HEAT EXCHANGER SETUP - $7500 + Shipping / PP.
- Comptech 1.6 Supercharger Kit - Blower was completely rebuilt in 2016 by JB Performance, still under warranty. All internals seals, couplings etc. replaced, and impellers polished & balanced.
Includes low and hi boost pulleys.
- Custom Laminova Water to Air Intercooler Kit - Custom intake manifold - Top mount design - 12AN water inlets / outlets
- RC 550cc Injectors, with custom vibrant AN fuel lines, AEM Fuel Pressure Regulator
- Custom Aluminum Air Box / Dual ARC filters, 3.5"
- Rebuilt alternator from AES, all couplers upgraded to silicone
- Cedar ridge locking S/C belt tensioner
- AEM Air Temp sensor & Fuel Pressure sensors
* I do have an extra engine-bay mounted aluminum reservoir tank for the intercooler, that sits where my oil breather tank is currently. I can include this for $100 extra. I also found my old front mounted radiator (heat exchanger), $100 for this as well.
Last edited:
Similar threads
- Locked
