You have many options, Ebay, CL, DF, etc, and they are all cheaper than us.
We don't know each other and they are not our competitor so we got nothing to worry. they do not exclusively selling NSX product(hint
#1 = rice=>not that there is anything wrong with that), their console doesn't have a good shifter mounting solution and 3M double side tape is very cheese & does not like heat(hint
#2 ) thus is not PNP and its like the typical Dali parts, you have to fiddle. they have plenty in stock (hint
#3 ) vs we made to order, no option to cut it to size, etc..... so this usually means its an oversea product with oversea labor vs our CA min. wage just gone up and our labor are ex-IMSA composite guys.
The cosmetic "flaw" in pix is fixed easily as this is not a structure piece and its quite difficult to get the weaves 100% so it will be painted in the future. Some vendors of the same piece use fiberglass which we believe its more fitting for cars like the Integra/Civic/RSX :wink:
We made this piece not for bling nor for the stereo folks but since this is a tight community, we try our best to please but sometimes its not possible. We may not offer the cutting DIN cut option anymore because stereo sizes can be all different than the standard DIN sizes and if the custom measurements provided by the customer is off, we don't take it back which makes people really
. Besides, this piece is PITA to set up to cut and no vendors like to make parts 5 at a time but our vendors are friends from way back.
Hint#4, the way water jet cuts the material with such a high pressure, if the pieces is not made well, the starting cutting point will "blister" which means the piece is poorly laid and will delaminate. So it should tell you right there the way our piece is made. Some people care, some don't. Wet lay up is weak but great for surfboard only.
Hint#5 - carbon dust is very dangerous so we don't want you to cut it with a dremel tool by hand. This should be jig-ed to cut it clean.
We are not the only game in town and you have plenty of options in terms of price. To post pix like
#82 will scare us and end up on our list, as its not even a problem at all. The only con ordering from us is you have to wait until its made BUT we WILL ship. None of us are "racing" with a big winning prize on the line that need the part NOW. If you have problem with it, contact us thru PM. No need to post to the world.
FYI, we try to make parts that are upgrades not mods. IMO, typically mods are only doing one specific task but upgrades provide a multiple of benefits and usually are better, stronger, lighter = faster and you should feel it working for you ALL the time even if its not in operation. We may not succeed at this 100% but thats how we're taught to think. The real reason we made this piece is we are working to integrate this piece for future upgrade$ that needs CAN bu$ technology and more if we succeed along the way. Hopefully by the end of this year because we believe solutions for the past($) is not ideal for the problems of the present($$$). This also depends if you want to keep the NSX forever or you want to buy and flip.