Post pictures of your ride height and specs.

[jaffaz32]

I've done some searching and can't find a thread with multiple pictures of lowered Nsx's at different ride heights.

I think it would be good to see, to help people out who are thinking about lowering their Nsx and to what height.

So please post a pic from the side, and maybe from a front angle showing the front and side.

Then stating below how much of a drop this is from oem Front and Rear, what shocks, springs or coilovers you have plus any other related info.

Thanks

 

[jaffaz32]

Well i thought it was a good idea, i did perhaps post in the wrong section, Doh!

 

[Brylek]

I think it's a great idea, I can even post a picture of my car but I don't remember my specs .

 

[jaffaz32]

Yeah me to.

Boo haha.

Can a mod move to the Wheel section?

 

[comtec]

Ok, i'll get you started. :wink:


TEIN S.TECH
OEM shocks
Downforce lip
Wheels 18/19

Approximately 1" F/R

Mike

 

[Teej]

Ok, i'll get you started. :wink:


TEIN S.TECH
OEM shocks
Downforce lip
Wheels 18/19

Approximately 1" F/R

Mike

damn thats hot

 

[jaffaz32]

Very hot indeed!

 

[nsxot1c]

Tein RA Coilovers as low as they would go... Not low enough

18/19" Dropped Approx 2.5"

BC Coilovers with Swift Springs.... VERY Low

18/19" Dropped approx 3.5"+?


<a target='_blank' title='ImageShack - Image And Video Hosting' href='http://imageshack.us/photo/my-images/24/2323am.jpg/'><img src='http://img24.imageshack.us/img24/5056/2323am.jpg' border='0'/></a>

<a href="http://s179.photobucket.com/albums/w308/Nsxot1c/?action=view&current=17-1.jpg" target="_blank"><img src="http://i179.photobucket.com/albums/w308/Nsxot1c/17-1.jpg" border="0" alt="Photobucket"></a>

 

[comtec]

Thanks guys.

Mike

 

[synergy004]

TEIN FLEX Coilovers
Custom spring rates
Variable Ride Height (VRH)
Oem Camber settings
Medium Dampening rear soft/Medium front

Pictured setting not all the way down on the VRH. Can raise and lower 3.75 inches on coilover lowest setting.

 

[payam972]

koni adjustables w/h&r springs...will probably go BC coilovers soon.

 

[sleek_nsx]

koni adjustables w/h&r springs...will probably go BC coilovers soon.

That looks low.. Damn I'm on H&R springs with OEM shocks and I dont sit that low..

 

[Hapa88]

Eibach Pro-Kit Springs (I think they've settled over the years)
Bilsteins on the Upper (OEM) perch.

18/19s on both pix. Top pix has the heavier OEM exhaust. Bottom pix has a lighter Taitec GT-102 which may be why the rake is different.

 

[Dhalsim]

For those posting their heights in this thread for the sake of uniformity shouldn't everyone measure from the same point? Also some are saying 1.5" ~ 2.5" from OEM but measured from where? Or did I miss something?

Also I think OEM height is different depending on year as well as rake.