B bsid786 Joined 29 May 2015 Messages 11 28 November 2017 #1 Hey anyone know if A disk from work wheels clears stoptech brakes?
NSX-GT Joined 15 October 2002 Messages 346 29 November 2017 #2 Get a brake diagram from Stoptech and send it to WorkUSA, they can determine for you. I know Work Meister S13pc doesn't clear Brembos in the front.
Get a brake diagram from Stoptech and send it to WorkUSA, they can determine for you. I know Work Meister S13pc doesn't clear Brembos in the front.
mwagner10702 Joined 30 March 2016 Messages 817 Location Oregon USA 29 November 2017 #3 Not a definitive list, but here are some known fitments: Advan RS, RZ, RG, RS-D, and RG-D front: 17 or 18 x 8.0+37, rear 18 or 19 x 10.0+35 Volk Racing CE28N front: 17x8.0+38, rear 18x9.5+36 Advan Model 5: 17x8.0+38, rear: 18x10.0+42 Factory Honda 2002-2005 wheels require 15mm spacer front, 25mm spacer rear Here is the fitment guide NSX-GT referred to: https://www.scienceofspeed.com/resources/products/Stoptech measuring guide - NSX, 1991-05.pdf Last edited: 29 November 2017
Not a definitive list, but here are some known fitments: Advan RS, RZ, RG, RS-D, and RG-D front: 17 or 18 x 8.0+37, rear 18 or 19 x 10.0+35 Volk Racing CE28N front: 17x8.0+38, rear 18x9.5+36 Advan Model 5: 17x8.0+38, rear: 18x10.0+42 Factory Honda 2002-2005 wheels require 15mm spacer front, 25mm spacer rear Here is the fitment guide NSX-GT referred to: https://www.scienceofspeed.com/resources/products/Stoptech measuring guide - NSX, 1991-05.pdf
synth19 Joined 9 September 2007 Messages 5,486 Location Chicago Burbs 29 November 2017 #4 There is a stoptech wheel clearance thread here on prime too....
mwagner10702 Joined 30 March 2016 Messages 817 Location Oregon USA 29 November 2017 #5 synth19 said: There is a stoptech wheel clearance thread here on prime too.... Click to expand... http://www.nsxprime.com/forum/showt...el-Fitment-Thread?highlight=stoptech+template<svg width="16" height="16"></svg>
synth19 said: There is a stoptech wheel clearance thread here on prime too.... Click to expand... http://www.nsxprime.com/forum/showt...el-Fitment-Thread?highlight=stoptech+template<svg width="16" height="16"></svg>