sent payment Monday, excited to install!
-
Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.
Window regulator upgrade kits
- Thread starter Hugabuga
- Start date
- Status
Just paid by Paypal!! Thanks.
1. ChopsJazz
2. nsxinkl
3. OLDMNSX
4. SMYLDOC
5. ediddynsx for two sets-payment sent 5/20/10
6. ryan1926
7. ChadAtlanta
8. UnhuZ
9. Shawn110975 for two sets-payment sent 5/21/10
10. 96cxt
11. ediddnsx
12. angus
13. Chris_NSX
14. Gred@R-Tuned
15. CDX_NSX
16. Ponyboy
17. ryan1926
18. scotchtzd
19. MetalSpikeRacing
20. I1O101I
21. Fastraxturbo
22. Frank Spano
23. dablackgoku1234
24. kennyc
25. warrenw
26. greenberet
27. GUNDAN323
28. Rando
29. vf2ss
30. 94brooklandsc
31. DDozier
32. kelly's nsx
33. bikenut
34. huntjames
35. grnsx
36. ofdlt10
37. owali
38. NSX-Appeal
39. Vikas
40. NSXBRO2
41. Russian007
42. Sandman1962
43. liftnot
44. T-Ram
45. Zishan
46. michl_moto
47. Lipper
48. NMYMIRR
49. jorligan
50. lithiumus
51. RichM
52. nsxinohio
53. YTRY
54. EK4 hatchback
55. Sduffass
56. Myaddiction
57. Truckadsjoe
58. Honcho
59. soloracer951
60. drnsx
61. redrocket
62. NSX2398
63. Acura NsX Pilot
64. Nick675
64 = Me! muito obrigado!
2. nsxinkl
3. OLDMNSX
4. SMYLDOC
5. ediddynsx for two sets-payment sent 5/20/10
6. ryan1926
7. ChadAtlanta
8. UnhuZ
9. Shawn110975 for two sets-payment sent 5/21/10
10. 96cxt
11. ediddnsx
12. angus
13. Chris_NSX
14. Gred@R-Tuned
15. CDX_NSX
16. Ponyboy
17. ryan1926
18. scotchtzd
19. MetalSpikeRacing
20. I1O101I
21. Fastraxturbo
22. Frank Spano
23. dablackgoku1234
24. kennyc
25. warrenw
26. greenberet
27. GUNDAN323
28. Rando
29. vf2ss
30. 94brooklandsc
31. DDozier
32. kelly's nsx
33. bikenut
34. huntjames
35. grnsx
36. ofdlt10
37. owali
38. NSX-Appeal
39. Vikas
40. NSXBRO2
41. Russian007
42. Sandman1962
43. liftnot
44. T-Ram
45. Zishan
46. michl_moto
47. Lipper
48. NMYMIRR
49. jorligan
50. lithiumus
51. RichM
52. nsxinohio
53. YTRY
54. EK4 hatchback
55. Sduffass
56. Myaddiction
57. Truckadsjoe
58. Honcho
59. soloracer951
60. drnsx
61. redrocket
62. NSX2398
63. Acura NsX Pilot
64. Nick675
64 = Me! muito obrigado!
Ola Nick675, you have PM
As I have a few kits available you just need to PM me and I'll send it to you right away, no need to put yourself in the waiting list anymore :biggrin:
Cheers
As I have a few kits available you just need to PM me and I'll send it to you right away, no need to put yourself in the waiting list anymore :biggrin:
Cheers
Hugo,
You're posting the DIY instructions today?
Ken
You're posting the DIY instructions today?
Ken
Instructions are not ready, they are giving me a lot of work, you'll understand why when I'll post them!:wink:
Rammstein are performing live tonight in Lisbon, so that doesn't help as I have to go there, i am sorry :biggrin:
http://www.rammstein.de/Tour.html?lang=en
I will post some temporary instructions by PM late night or tomorrow morning for those of you who have already received the kit so you don't have to wait too long!
Cheers
Hugo
Rammstein are performing live tonight in Lisbon, so that doesn't help as I have to go there, i am sorry :biggrin:
http://www.rammstein.de/Tour.html?lang=en
I will post some temporary instructions by PM late night or tomorrow morning for those of you who have already received the kit so you don't have to wait too long!
Cheers
Hugo
Thanks Hugo, I got my parts and will install them next week.
Enjoy the concert!
Enjoy the concert!
1. ChopsJazz
2. nsxinkl
3. OLDMNSX
4. SMYLDOC
5. ediddynsx for two sets-payment sent 5/20/10
6. ryan1926
7. ChadAtlanta
8. UnhuZ
9. Shawn110975 for two sets-payment sent 5/21/10
10. 96cxt
11. ediddnsx
12. angus
13. Chris_NSX
14. Gred@R-Tuned
15. CDX_NSX
16. Ponyboy
17. ryan1926
18. scotchtzd
19. MetalSpikeRacing
20. I1O101I
21. Fastraxturbo
22. Frank Spano
23. dablackgoku1234
24. kennyc
25. warrenw
26. greenberet
27. GUNDAN323
28. Rando
29. vf2ss
30. 94brooklandsc
31. DDozier
32. kelly's nsx
33. bikenut
34. huntjames
35. grnsx
36. ofdlt10
37. owali
38. NSX-Appeal
39. Vikas
40. NSXBRO2
41. Russian007
42. Sandman1962
43. liftnot
44. T-Ram
45. Zishan
46. michl_moto
47. Lipper
48. NMYMIRR
49. jorligan
50. lithiumus
51. RichM
52. nsxinohio
53. YTRY
54. EK4 hatchback
55. Sduffass
56. Myaddiction
57. Truckadsjoe
58. Honcho
59. soloracer951
60. drnsx
61. redrocket
62. NSX2398
63. Acura NsX Pilot
64. Nick675
65. AndyH
2. nsxinkl
3. OLDMNSX
4. SMYLDOC
5. ediddynsx for two sets-payment sent 5/20/10
6. ryan1926
7. ChadAtlanta
8. UnhuZ
9. Shawn110975 for two sets-payment sent 5/21/10
10. 96cxt
11. ediddnsx
12. angus
13. Chris_NSX
14. Gred@R-Tuned
15. CDX_NSX
16. Ponyboy
17. ryan1926
18. scotchtzd
19. MetalSpikeRacing
20. I1O101I
21. Fastraxturbo
22. Frank Spano
23. dablackgoku1234
24. kennyc
25. warrenw
26. greenberet
27. GUNDAN323
28. Rando
29. vf2ss
30. 94brooklandsc
31. DDozier
32. kelly's nsx
33. bikenut
34. huntjames
35. grnsx
36. ofdlt10
37. owali
38. NSX-Appeal
39. Vikas
40. NSXBRO2
41. Russian007
42. Sandman1962
43. liftnot
44. T-Ram
45. Zishan
46. michl_moto
47. Lipper
48. NMYMIRR
49. jorligan
50. lithiumus
51. RichM
52. nsxinohio
53. YTRY
54. EK4 hatchback
55. Sduffass
56. Myaddiction
57. Truckadsjoe
58. Honcho
59. soloracer951
60. drnsx
61. redrocket
62. NSX2398
63. Acura NsX Pilot
64. Nick675
65. AndyH
Dear PrimeMembers,
After 2 weeks of shootings, I have finally released the WINDOW KIT INSTRUCTIONS movie :biggrin::biggrin::biggrin:
http://www.youtube.com/watch?v=SSzUMkjHv5w
Music is from the Portuguese dj Rui da Silva, hope you like it!
Message is clear: if a 6 years old girl could do it, YOU can do it:wink:!
Have fun!
Hugo
After 2 weeks of shootings, I have finally released the WINDOW KIT INSTRUCTIONS movie :biggrin::biggrin::biggrin:
http://www.youtube.com/watch?v=SSzUMkjHv5w
Music is from the Portuguese dj Rui da Silva, hope you like it!
Message is clear: if a 6 years old girl could do it, YOU can do it:wink:!
Have fun!
Hugo
muahahahahahah.... only you to come up with a "in your face" instructions :biggrin::biggrin::biggrin:
i only have one question though: when you install the last thing inside the motor, the spring, don't you contract it a bit before attach it to the axle's top?!
Nuno
i only have one question though: when you install the last thing inside the motor, the spring, don't you contract it a bit before attach it to the axle's top?!
Nuno
Great video. But how about some Ellington or Coltrane next time? :wink:
Great video.
I guess there isn't any child labor laws there in France or Portugal. :biggrin:
I guess there isn't any child labor laws there in France or Portugal. :biggrin:
- Joined
- 19 March 2003
- Messages
- 3,442
Hugo
Can you me details I am also wanting to add this to the build.
Thanks
Gil
Can you me details I am also wanting to add this to the build.
Thanks
Gil
synergy004: you have PM! What a great build you are doing:biggrin:!!
NSXclear: movies and actress have special laws:biggrin:
ChopsJazz: you can always reduce the volume and play a different music style!:wink: I wanted to use Rammstein..but fond this Portuguese "youtube tipical song" more suitable, especially because of the lyrics
Unhuz: yes, you must pre-load it with a 540º angle (1 turn and 1/2), as described earlier in the post.
Look forward to get all your feedbacks
Cheers
Hugo
NSXclear: movies and actress have special laws:biggrin:
ChopsJazz: you can always reduce the volume and play a different music style!:wink: I wanted to use Rammstein..but fond this Portuguese "youtube tipical song" more suitable, especially because of the lyrics
Unhuz: yes, you must pre-load it with a 540º angle (1 turn and 1/2), as described earlier in the post.
Look forward to get all your feedbacks
Cheers
Hugo
The kit is $50 per side shipped to the USA right ?
If so I'll one.
Please see my question in your DIY thread about excessive wire tension after I put in the Dali window fix it thingies.
If so I'll one.
Please see my question in your DIY thread about excessive wire tension after I put in the Dali window fix it thingies.
lightguy: that is correct! you have PM.
If there is excessive cable tension after any modification, you should always open the motor and release some tension to avoid future failure.
If there is excessive cable tension after any modification, you should always open the motor and release some tension to avoid future failure.
Hugo,
I had a difficult time with the reassembly and didn't get the tension right.
Could you send your daughter over to help me? I think I need an experienced pair of hands to get it right!
I'm trying it again today.
I had a difficult time with the reassembly and didn't get the tension right.
Could you send your daughter over to help me? I think I need an experienced pair of hands to get it right!
I'm trying it again today.
ChopsJazz: make sure the short cable goes into the last groove of the lower core part when you join the 2 core parts, this is quite tricky as you won't notice it's not in place!
I found it to be easier with a fixing tool (like the red one from the movie) because it also helps to pull the lower core part and not just fix it.
I found it to be easier with a fixing tool (like the red one from the movie) because it also helps to pull the lower core part and not just fix it.
Hugo,
Sent payment by pay pal on May 25th. What kind of delivery should I expect.
Thanks again for the research and development. Dan (GRNSX)
Sent payment by pay pal on May 25th. What kind of delivery should I expect.
Thanks again for the research and development. Dan (GRNSX)
Dan, you should receive it this week, depending on customs and USA post service as it is already in the US since Saturday according to its Tracking Number.
Truth is that I ran out of stainless steel washers, each kit uses 2 of them, that makes 4 of them/set!
These washers are not available in the market due to their size, I had to order them from France, they are used mainly to make thru-hull repairs in fiberglass boats, so I could only ship the last kits early last week, yours was one them...
Truth is that I ran out of stainless steel washers, each kit uses 2 of them, that makes 4 of them/set!
These washers are not available in the market due to their size, I had to order them from France, they are used mainly to make thru-hull repairs in fiberglass boats, so I could only ship the last kits early last week, yours was one them...
Thanks for the quick update!
Hugo, the info below is CRUCIAL!
I had to go back and redo my efforts twice before I figured out what the problem was.
Now it's great though! :biggrin:
Thanks for a great effort making this project happen.
I had to go back and redo my efforts twice before I figured out what the problem was.
Now it's great though! :biggrin:
Thanks for a great effort making this project happen.
ChopsJazz: make sure the short cable goes into the last groove of the lower core part when you join the 2 core parts, this is quite tricky as you won't notice it's not in place!
I found it to be easier with a fixing tool (like the red one from the movie) because it also helps to pull the lower core part and not just fix it.
- Status
Similar threads
