Search results

Bought these oil pan drain bolt washers online. The inner diameter is the same as the oem, but they are obviously wider. The washer on the right is OEM. Would these work? Thx.

we accidentally spilled hand sanitizer on a cream color leather seat and the spot now turned into dark brown. I read that it basically stripped off the cream color dye. any suggestions how to go about restoring it? Thanks.

I am curious if I should remove the wheels while the car is on jack stands for a few days? Just wondering if the weight of the wheels would put too much stress on the suspension while the car is on jack stands. Thanks.

I read that it should be clear without any bubble for a full system when it is on. However, my newer Scion has bubbles and the AC works well and cold. My NSX has a little bubbles, and it's still reasonably cold. Don't quite remember how cold it is suppose to be, but probably less so than the...

I have an 92 with black interior. The OEM floor mats have the silver NSX logo. Does anyone know whether the OEM floor mat is considered black or grey that matches the interior carpet? Thx.

Heard there is a shop in San Gabriel Valley called HQ Engineering that specialized in NSX. Anyone has experience with them in term of quality of service and pricing? It's strange that I can't find their location with Google. Thanks.

Have a set of regular jack stands that have a deep U shape top that is too wide and deep for the factory jack points. What is the proper way to position the jack stands safely? Thanks.

Just picked up a Baldwin oil filter (B1422). It just about the size of the Honda short filter. Reviews are good for the Baldwin oil filters in general. Anyone has experience with it?

For those of you who store the NSX during the Winter. What type of fuel stabilizer is safe to use and doesn't damage the O2 Sensors and the catalytic converters? Also, will the fuel stabilizer adversely effect the smog test? Thx.

I recalled Honda changed the water pump and the lower timing cover (weep hole) long ago. I am curious if the water pump and the lower timing belt cover with the new weep hole are compatible for both the 3.0 (na1) and 3.2 (na2) motors? Thanks.

Since the oil pan gasket was more than 20 years old (without leak), I decided to have it changed as preventive maintenance. Sadly, the gasket only lasted a few years and it is now leaking. I ran my hand across the edge of the oil pan and noticed that the gasket is bulged out a bit beyond the...

I have to replace the car battery today and noticed that the old battery was a group 24 rather than the group 35. The positive terminal location is opposite for them. The group 24 has it toward the rear of the car while the group 35 is toward the front. I am curious if the positive battery...

Got a question for the car insurance experts. I currently insured my NSX with an estimated annual mileage of 2800 miles. I was wondering if I would save money by reducing the estimated mileage to about 1500 or 2000 miles I heard that most insurance company premium calculation bottom at 3000...

I can't find the refill for the original wiper blade as they are really narrow. Have anyone tried the beam or the hybrid wiper blades on the NSX? I have the beam type on my other cars and they look pretty good.

came across this from another site..... just careful http://www.the370z.com/lounge-off-topic/124311-word-caution-new-buy-sell-scammers.html

Need to remove a couple of door dings on my other car. Any good one in San Gabriel Valley. Thanks.

Has anyone measured the oil temperature under normal operation for a NA1 stock motor? I don't drive my car much and want to get the oil temperature to around 212 to get rid of the moisture in the oil. I normally take it out for about 10 to 15 miles (30 - 40 min) locally. Assuming the...

I was wondering if the cops are still ticketing people without front plate since most of the red light cameras are removed? I am thinking about removing it.

Does anyone have this specific cover and whether it is well made in term of fitment and the quality of the material? Thx. http://www.coverking.com/custom-car-covers/uv-protection-silverguard.html

Does anyone know whether they are good quality wheels? I understand they are discontinued and was told that they were close to $4k new a few years back ordered directly from Japan? How much do they worth now if they are in 19s' and good condition? These are for a 'Z'. Thx.

I was wondering the purposes of the 'X' pipe of some of the exhaust systems in the market. Does the 'X' pipe make the exhaust more restrictive since it has a smaller diameter (2 into 1) comparing to 2 separate pipe and also merging the exhaust flow from both banks which may cause potential...

Have a general question regarding tire wear. The rear tires were worn excessively on the very inner edge portion while the rest still looks great due to alignment issue. My question is whether the tires will wear in a normal pattern across the tire or it will continue to chew on the inner...

I have a general question for the suspension guru here. I am curious about the impact in inner tire wear with 0.3 degree difference in the rear camber. Let's say if I set the camber at -2.0 vs -1.7, would that cause additional inner tire wear? I also read that additional negative camber...

I was checking the clutch master cylinder under the dash and noticed there is a couple of drops of black grease around the black rubber boot and also some on the metal rod. I was wondering if it is black grease inside the rubber boot or it is something else? I didn't see any clutch/brake...

Have anyone purchased this filter recently, especially from Sparkplugs.com? I was just wondering if it is still the 'tall' version filter since Amazon shows the 'short' version. Thx.