Search results

I think you need a new or rebuild alternator (overcharge). Voltage regulator is gone.

You can match the contact points at Toyota dealer. I did on my Corolla & Previa last summer. There are 3 different types of contact. Bring your old contacts.

I used Spoon caliper before on my 93. Monoblock (S2000) with 97 & up NSX rotors.

What size is your GT7? (17 & 18) or (18 & 19) Nice paint job & Wheels;)

Nice Pic. Mike;) Why not post your Gruppe M spoiler:confused:

I think the piston of the caliper does not align at the right position. (Should be align with the pin on the pad)

I think your problem is Ignition Switch Wire Harness. (Not Ignition Switch) You better pull out the wire harness & turn by flat tip screwdriver, then you know what's wrong.

Triangle bar What brand is it?

take out the cap & remove the overflow hose. check any crank around the neck. or bring you car to your mechanic pressureize coolant system.

I check with the dealer. They only sell BJ boot only. (No BJ separate) (Not like Civic, Accord I can buy BJ only) I have to buy the whole knuckle assy. (That come with upper & lower BJs.) Too bad.

Today I check the front end on my 93 NSX. I found that both sides lower ball joints have a little free play. Are they normal or have to replace? Also, are the ball joints (upper & lower) come with the knuckle? Can I just buy the ball joints? Anyone change that before? Thanks!

I don't think this set is not VR GTP.(GTP only 17" & 18", no 16") Am I correct?

when you jack up the car, also check the oil pan gasket too. my 93 has a little bit leaking oil around oil pan. i leave it until when i change the header.

Endless Brake Kit Is that Endless brake kit fit for OEM 16 & 17 rim? What size is the rotor? (same size with 97 & up) What about the rear rotor? (just bigger thant stock?) How much for front kit roughly? How much for rear big rotors?

Endless Brake Kit Nice set up!!!!!!!!!!! Your Endless brake kit is really good. I checked with Endless website, there is no application for NSX. Is it new kit, or modify from other model? Also, is the front 6-pot or 4-pot? I think 6-pot. (Am I right?) Thanks ;)

How do I run the hoses to oil catch tank? Can you post pics?

I tried Hawk on my Integra R before. The brake dust was crazy & change my white wheel to black wheel. Not easy to clean. I never never use it again. I never try project u. No comment. I tried Endless on my 93 NSX last year. I love it.(NAS, CCM, CCX) NA series good for street. CC series...

What size is best for 16" & 17" stock rims(Toyo RA1)? Rear set I think 255/40/17, but front : 205/55/16 OR 225/50/16? TRACK USE ONLY!!!!!http://www.toyo.com/tires/tire_specsheet.cfm?id=1 [This message has been edited by vincentvtec (edited 13 March 2003).]

Directly bolt on. NO MOD REQUIRED.

I will go for NEW Volk GTU. Look similiar BBS LM, but with gold colour.

I think Volk GTU perfect for your nice car.

I already installed Defi Oil Temp. & Oil Pressure gauges. Working very fine. Now I'm trying to install Water Temp. gauge, I don't know where is the good place to mount the temp. sensor. I check with Greddy, it has water temp. adaptor. Need to cut the coolant hose & put it in the middle. Is...

Did you double check the timing mark on all 4 cam gears? I saw same problem with the rear exhaust band cam gear off 1 teeth.

Nice pics!!!! I also living in Ontario Canada.(Toronto) What brand of rims you have? (17 & 18) or (18 & 19)?? After winter, I hope we can meet somewhere to discuss our NSXs.

Will ARC (single tip on each side) fit on 02 rear lower valance? Is anyone with this combination? Please post pics.