aem tru boost help and bov

[jet3000gt]

hi all. i have a 97 nsx with angus turbo installed.

need help with aem tru boost controll install. i dont know where to tap the hoses from the engine.

where do i tap the hose from my hks bov.

also where do i put the hose that came off the intake. think pvc

Pictures will help alot
thanks

 

[doc_tai]

To install boost controll, u connect a hose from the turbo to middle port wg, t that hose then connect a hose from that t to boost controll Solenoid then from solenoid to the top port of wg

The hose that come off the intake that connected to the rear bank valve cover, you can just leave it there or put breather filter on the valve over or u can run it to a catch can

PVC is the one that on the front bank valve cover, I delete PVC on my car and run two hoses from 2 valve cover to the catch can, so I use the vaccuum hose that connect to PVC for bov, or you can t it off brake booster hose

 

[jet3000gt]

Thanks. Now I need help wiring the gauges up. Was thinking from the cigarette lighter but I can't find a ignition wire. The book doesn't say.