Thx Thom and Richie for the instructions. I bought new J bearings but did not use them as the old bearings still look fine. All 4 of my pivots were as close as they can be so I had to use another solution to take up the ~2mm gap.
So far, after 300 spirited miles, its quiet as a mouse again and the rear end tracks well.
The whole process was very straight forward thx to NSXClear help and we only had to remove 4 upper A-arm mounting bolts per side.
So far, after 300 spirited miles, its quiet as a mouse again and the rear end tracks well.
The whole process was very straight forward thx to NSXClear help and we only had to remove 4 upper A-arm mounting bolts per side.