Compliance Pivot Cam Plate

[Honcho]

While cleaning up the compliance pivot for my Type-S.Zero project, I noticed that the cam plate hex/allen hole was damaged. I could not find a replacement in the Honda parts catalog, but am wondering if it is the same piece as #21 (cam plate for the lower control arm) in the diagram? Does anyone know?

 

[Larry Bastanza]

Yes that is the same part, but it appears to be unavailable........

 

[Honcho]

Thanks Larry- I'll order one. It's available from Acura of Peoria. I still use Tim after all these years.

 

[Larry Bastanza]

That hole used to be a hex pattern, someone used the wrong size hex key and ruined it, probably used an american hex instead of metric.......

 

[NSXGB]

Are you sure it will have the hex hole? If so I think I'll order some spares.

 

[Larry Bastanza]

Guys,

After a look under my car last evening, I am incorrect. The part in the pic DOES NOT have the hex hole, since the part in the pic is for alignment adjustment, that is controlled by the hex bolt on the suspension.

Sorry about that.....

Regards,
LarryB

 

[Honcho]

Thanks Larry. Looks like I will have to live with the jacked up plate until I can source a replacement from a junked pivot assembly... Do you think this will impact the car's ability to be aligned properly?

 

[Larry Bastanza]

You will have to figure another way to turn that. I do not think it will be a big deal, even a good size screwdriver will pivot it......