• Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.

nsx casting for gold/silver/platinum jewelry

update...
waxup back to jeweler, for touchup , pattern duplication,
and trial casting
some recommendations:

plump up left nose of car, develop symmetry
develop flatness to rear spoiler, again plump left
develop license plate,
and smooth underside[ will increase metal weight...]
pattern wheels[ stock wheels...]

anything else??
 
update...
waxup back to jeweler, for touchup , pattern duplication,
and trial casting
some recommendations:

plump up left nose of car, develop symmetry
develop flatness to rear spoiler, again plump left
develop license plate,
and smooth underside[ will increase metal weight...]
pattern wheels[ stock wheels...]

anything else??


how about a open faced setup with the nsx cut out grill for my teeth!!!!!!! that would be the ultimate grill. Stars and playboy bunnies are played out. :smile: :smile:
 
how about a open faced setup with the nsx cut out grill for my teeth!!!!!!! that would be the ultimate grill. Stars and playboy bunnies are played out. :smile: :smile:

how bout diamond '02 frogeye lights,
and some rubies in back for stoplights...:biggrin:

how you doin, playa belly-ko yoyoyo??
 
update...
waxup back to jeweler, for touchup , pattern duplication,
and trial casting
some recommendations:

plump up left nose of car, develop symmetry
develop flatness to rear spoiler, again plump left
develop license plate,
and smooth underside[ will increase metal weight...]
pattern wheels[ stock wheels...]

anything else??

mine would be used for a golf putt marker, possible cuff links, definetely a keychain
 
project is at the master casting phase.... it's an oem replica
done in a 91-01 light design. some polish & refining still planned.

scale to dime and unobtanium key for reference. larger format jpegs can be sent per your request via pm/email.

the plan is to use this casting pattern for some pendants & keyrings.
we will create a 10% reduction casting for cufflinks, earrings, and golf ball marker [i think you had better tell your opponent that you are blocking the cup w/ this marker...]

covering the bottom of casting w/ a plate has been dropped as an option...kinda silly

will open up orders later in week, and will post unit costs at that time.

i hope you like!! made in the usa!!!
saluteus.gif

dsc02161kv8.jpg

dsc02160an8.jpg

dsc02158af6.jpg

dsc02157zy5.jpg

dsc02156gd9.jpg

dsc02154sc7.jpg

dsc02153mr7.jpg
 
Sweet Jon ,I'm down for cuff links in anything other than traditional gold.
 
Sweet Jon ,I'm down for cuff links in anything other than traditional gold.
platinum?unobtanium?gummy bear?
we'll cast a bunch of silver...:biggrin:
bling for the bee!
 
Hey Doc
Finally gave up on tooth repair eh? Cufflinks work for me in gold and/or silver

Also need a neck chain for my significant other (gonna kill me). BTW can you add a harness bar and Takata Harnesses to be viewed through the open window :eek: :tongue:
 
ladies and germs.... the price list:eek: :biggrin:

pendants:
14k $700
18k $875
plat $2000
sterling silver $75

cufflinks:
14k $1550
18k $1775
plat $4000
sterling silver $150

pendants w/ diamond headlights a'la 2002:

14 k $1000
18k $1200
plat $2200
sterling silver $275
diamond quality is tiffany+/-

ruby tail lights, add $200

we'll apply a discount on purchases of multiple units.
please contact me via pm for your order & metal selection
and personal preferences.
this group buy will close in 2 weeks... nov 7, 2007.

your satisfaction is personally guaranteed by bancojalnjr .
100% of any windfall given to me by the artist will be
donated to prime's toys for tots xmas drive 2007

dsc02154sn5.jpg

boys please don't cad/cam a group buy for a working key to my car....:biggrin:
 
Last edited:
diamond quality +/- Tiffany's haha tiffany's is nothing great there owned by Avon and extremely over priced... and $200 for ruby's on that little car wow...
and who did the polish work? :confused:

sorry let me introduce myself 2nd generation master jeweler and wax carver
 
sorry let me introduce myself 2nd generation A-Hole in LESS than 7 posts

Fixed :smile: :rolleyes: :cool: :tongue:

BTW: putting somebody else's hard work down make you look like an ass. Did you read the
"100% of any windfall given to me by the artist will be
donated to prime's toys for tots xmas drive 2007
".

so no money here for you = go away Troll

Thanks,
 
diamond quality +/- Tiffany's haha tiffany's is nothing great there owned by Avon and extremely over priced... and $200 for ruby's on that little car wow...
and who did the polish work? :confused:

sorry let me introduce myself 2nd generation master jeweler and wax carver
ouch.
diamonds & rubies are not moving as an aftermaket upgrade for this gb. car as shown is the master right out of casting w/ some finish & polish.

your input p-needy raised the bar, and we'll meet/exceed. my friends are buying them, so
it's gotta be great.
 
Last edited:
Looking forward to receiving the ultimate accessory to adorn my french cuffed shirts. Just make sure to leave the wheels dirty....
 
it dawned on me that i had not told you about the artist. the tale i will tell may touch you, but within it you may find shared hope...

maria ogden has been a patient of mine for years. she came to me w/ a mouthful of crowns that fit like "socks on a cat". her previous dentist who placed these gems will soon be our nj gop candidate for senate[ more on this pos in another thread:mad: ...]. i discovered her fascinated by the process of crown production , and it's mirror industry of jewelry production. they are identical.

she always would flash her "projects"[ no snickers please...] or toss me raw diamonds to play with. her spirit is all fun, play and joy, and her life reflected that...two beautiful girls named amy & ' cheech ' and loving husband, darryl.
to see them on my schedule was a goooood day!

of course, the fairy tale ends.... her husband develops pancreatic cancer in 1995...a killer is an understatement... and maria's life is without doubt, a lil' emptier... i miss you darryl, i wish your teeth were not so perfect, so i could have gotten to know you more.:smile:

i have seen her maintain her joy and smile, thru to this day. even with that... to know her is to know grace...

she has had a hard time staying afloat financially, two girls now in college, and tax sales looming from time to time.... i took maria for a ride in the nsx a year ago, and blew her doors off on our twisties. she giggled, posessed it seemed...that "this is it" feeling you may remember... when we stopped, maria was gahgah about the car, talking nonstop. i joked to her that she could make a killing selling jewelry...ooops genie out of the bottle....

now you know the story of another member of our nsx family. to those who have supported this labor of love, i thank you. if you want to thank "otter", she's at 9088529777...

and a big hug to you, maria. thank you.:smile:
 
anyway to get really basix NSX lettering type cufflinks and maybe a tie tac :p
tongue waggn' aside, the letter idea would be a natural.
maria & i were thinking of casting the key next...
thanx blury!
 
it dawned on me that i had not told you about the artist. the tale i will tell may touch you, but within it you may find shared hope...<snip>
and a big hug to you, maria. thank you.:smile:
thx for sharing, doc... she sounds like a special person.

hal
 
48 hrs till closing bump....

i have been asked if castings will be available for sale after the deadline. no.

sales will close at midnight nov 8, 2007.
orders must rcv'd by then, either pm/private email/phone/ or post within this thread.

this is to assure timely delivery for the holidays,
casting houses in nyc are a lil busy this time of the year.
dsc02155po7.jpg
 
Last edited:
sorry does that man they are gonna be made? or does this mean maybe next time? sorry if I am a little slow :tongue:
maybe under your tree xmas2008, sorry blur.
we wanna nail this, so maria is focused
on the car project.

the response has been solid, and we'll consider the letters
for another time.
thanks for your interest!!
icon14.gif
 
Back
Top