Parked next to her new stable-mate, zero-owner S2000 CR.
-
Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.
Post your most recent picture of your NSX...
- Thread starter Caroline-NSX
- Start date
-
- Tags
- nsx pictures nsx wheels
Parked next to her new stable-mate, zero-owner S2000 CR.
- Joined
- 12 January 2017
- Messages
- 281
Happy Saturday!!!!
198k miles & Counting
Sent from my SM-G950U using Tapatalk
198k miles & Counting
Sent from my SM-G950U using Tapatalk
I'm not sure how long it took you to make that decision..... but congrats.
I would have had to have both. lol
nice...did the dealership perform recent recalls or have the gas tank and 3rd brake light fuse issues been rectified at factory?
First ticket in new car?
Two pictures from a buddy of mine. He did a little bit of editing to the image to make it pop more.
Sent from my iPhone using Tapatalk
Half of John photo bomb
Last edited:
What size and offsets is your wheel setup?
17/18
Not sure of the offset. The backs have 2 spacers each. They were a fortune to restore.
Not sure of the offset. The backs have 2 spacers each. They were a fortune to restore.
They are S Drives. Great tires. Backs are 275/35 R18 and fronts are 215/40 R17 I believe
I have 18" Front and Rear Prodrive GC07Cs.
Front: 18x7.5 +35 215/35 R18
Rear: 18x8.5 +39 255/35 R18
No spacers in the Front, the Rear has 25mm spacer:
Interesting new spoiler ... which brand or DIY please?
Here is the Amazon listing.
I had to cut it to fit around the vents under the car. It was touch and go for a while. I also had to replace the bolts under the car with flat hex bolts as well.
[GT-Speed made Universal Valance V2 PU Front Bumper Lip Flat Splitter Plate Under Panel Diffuser Chin Spoiler BMW E60 BENZ C250 C300 (MEASURE YOUR BUMPER BEFORE PURCHASE - 67"L x 21"D)
[/COLOR]
On the whole it cost about $100 and a lot of labor.
I had to cut it to fit around the vents under the car. It was touch and go for a while. I also had to replace the bolts under the car with flat hex bolts as well.
[GT-Speed made Universal Valance V2 PU Front Bumper Lip Flat Splitter Plate Under Panel Diffuser Chin Spoiler BMW E60 BENZ C250 C300 (MEASURE YOUR BUMPER BEFORE PURCHASE - 67"L x 21"D)
[/COLOR]
[*=center]
On the whole it cost about $100 and a lot of labor.
Last edited:
Finally, my new (to me) NSX!
Similar threads
- Locked
- Sticky
