ok, so i purchased this brand new spoiler from a vendor here on Prime, i won't mention who but they did all they could to help me with the problem..i would still purchase from this vendor in the future with other item..plenty of picture to see..this is y budget wing are bad..i know, i know..why would u put such a crappy thing on the nsx right? well, i "THOUGHT" SEIBON product was suppose to be good..i KNOW other on here have purchase seibon product..they seem to have made a name for themself already..
Price: 450
Fitment: good
Quality: good
Build: somewhat bad
problem:
brake lamp fit poorly and cracks from low quality sealant let water in and stays in..wiring came out the wrong side of the wing..
wrong side wiring:
Fitment:
Gap of the wing's blade on driver side larger then driver side.
Driver side toe blade sits taller then passenger side.
under trunk screws holding wing down, all lines up pretty good..
so after sending numerous pictures to the vendor about the problem, vendor forwarded to Seibon..Seibon replied and said they pulled 1 wing from their current batch and it's the same problem...so they went back and look at ALL the wings from this batch and sure enought..ALL were like this..it amazes me how you can make a part for the nsx and still manage to miss which side the brake wiring should come out of..stock wiring for all yrs on the nsx is the same..Driver side..
anyway, i just thought i throw it out there so other can see..so they can learn from my mistake...
the wing is still on the car, the brake lamp still work dispite water get inside..took me an hour to fish the wiring to come out the driver side..had to drill a 3/8" hole under the driver side wing's blade to pull the wire out..PITA!!!
vendor offer to refund me minus shipping cost back to them..i don't feel like throwing 50-75$ down the drain..so, i kept it and try to make the best out of it..
so, inconclusion: make sure u check with whomever u plan on buying, part(s), wing, from to ensure that the part is built correctly..
good luck
Price: 450
Fitment: good
Quality: good
Build: somewhat bad
problem:
brake lamp fit poorly and cracks from low quality sealant let water in and stays in..wiring came out the wrong side of the wing..
wrong side wiring:
Fitment:
Gap of the wing's blade on driver side larger then driver side.
Driver side toe blade sits taller then passenger side.
under trunk screws holding wing down, all lines up pretty good..
so after sending numerous pictures to the vendor about the problem, vendor forwarded to Seibon..Seibon replied and said they pulled 1 wing from their current batch and it's the same problem...so they went back and look at ALL the wings from this batch and sure enought..ALL were like this..it amazes me how you can make a part for the nsx and still manage to miss which side the brake wiring should come out of..stock wiring for all yrs on the nsx is the same..Driver side..
anyway, i just thought i throw it out there so other can see..so they can learn from my mistake...
the wing is still on the car, the brake lamp still work dispite water get inside..took me an hour to fish the wiring to come out the driver side..had to drill a 3/8" hole under the driver side wing's blade to pull the wire out..PITA!!!
vendor offer to refund me minus shipping cost back to them..i don't feel like throwing 50-75$ down the drain..so, i kept it and try to make the best out of it..
so, inconclusion: make sure u check with whomever u plan on buying, part(s), wing, from to ensure that the part is built correctly..
good luck