Recent content by NSXclear

Any chance you willing to trade for a pair of my smoke or dark smoke sidemarkers? For pics. See www.nsxclear.com Sent from my SM-G935T using Tapatalk

I have used the Denso 02 sensors on several NSX's and never had any problems. Many here have used the Denso sensors without issues. Interestingly the NSX uses both NGK and Denso parts. NSX OEM 02 sensors are NGK/NTK. NSX OEM spark plugs are Denso. As an alternative, using Denso 02 sensors...

Another option is to use wrinkle spray paint from VHT. I used the wrinkle red spray can, and I think the valve covers turned out amazing. I've had it on for over 4 years and there is no signs of flaking or chipping. For a perfect wrinkle effect, the trick is to use a heat gun after applying...

The 3/8 torque wrench should be sufficient for most task. You'll likely be working with 3/8 sockets for most of your tasks and it makes switching socket between gun/ratchet to torque wrench more managable. But it's always good to eventually have a 1/4, 3/8, and 1/2 torque wrench. The 1/2...

It sounds like the bolt might have been cross-threaded when the last person installed that bolt. If cross-threaded, removing the remaining bolt will not always come out easily. Get the beer ready and keep small childern from the work area -- I suspect plenty of foul and vulgar language will...

I took out my window rails and cleaned them before Hugo came out with his pulley fix. I do believe that the source of the problem is the caked grease on the tracks. The pulley upgrade is a great solution to overcome the friction of the grease and his pulley works in most cases. It is also...

I worked on this project a couple years ago when I made my side markers (www.nsxclear.com). I was going to make just the 02+ lens and the diffuser for the tail lights, not the entire unit. I was also going to make a JDM version. This is not an easy project. The mold cost is very expensive...

Unless you maintain your own car and have access to cheap parts, I would stay away from BMW as a DD. Pelicanparts.com is a good online part dealer, but I have a local shop here that gives me better prices than pelican. These cars have the same exact problems year after year. BMW doesn't...

The stock market for the last couple of years doesn't have any substance and is heading in a path of potential destruction. I'm not saying that destruction is likely, rather, I am suggesting a higher possibility than it has been in the past. Although the stock market has always been...

If I recall correctly, they can differ for certain years.

I would definitely take it to a local shop to have the alternator rebuilt. It cost me about $75 to have most alternator rebuilt.

Using this method is not without risk, especially when you put extensions on the socket. The weight of the long breaker bar and the extension can cause the socket to tilt at an angle. It helps to use a jack stand to help support and to assure that the socket is seated straight and secure...

If it is deeply discharged, dry cell batteries are extremely difficult to recharge. A 0.5 Amp will definitely not charge it if the voltage is below 11.0 Volts. You will need at least a 5 Amp or 10 Amp battey charger. You will additionally have to connect your discharged dry cell battery to a...

I will send you a new set.

They have to go in a particular order. I remember putting removing this in the past, and the handle did not working properly because I mixed up the order. I dont remember which way it goes.