Recently change ECU to EMS due to AP-X kit. When I drive the car I hear a loud clicking from the EMS area and the car dies. Take the keys out and restart the car and drive away. New fuel pump, injectors. Any ideas?
Thanks
Recently change ECU to EMS. When I drive the car I hear a loud clicking from the EMS area and the car dies. Take the keys out and restart the car and drive away. Any ideas?
Thanks
Just installed new arm ems and now I hear a clicking noise behind the passenger seat and head height. Thought it was coming from the ems but not sure. Hear it at start up and when I step on it. Running a turbo kit with new fuel pump and injectors. Any ideas?
thanks
Just had my car tuned with AEM EMS and now the TCS light stays on. Read somewhere that removing the factory ecu and going with EMS may cause this. How did I get the light to turn off?
Thanks
Installing new injectors and read the wiki. It mentioned specific torque values(9-16lbs). Those of you that have done this, are the values that important or can I just do hand tight? Are there two rings per injector that need to be replaced? One on the individual injector and one on the...
I installed a after market head unit(with SOS harness)to my stock speakers and amp and I'm getting sound when set to radio but nothing with CD or DVD play back. The stock CD changer has been removed as well. Help would be appreciated.
Thanks
Need to buy a harness that connects into this one and connects to my SOS harness. Any ideas on where to buy one? Radio Shack or Best Buy? It's divided up with 16pins on each side. Did not come with one. I guess I could cut the wires I need and connect them directly but not my first choice...
To get springs to ride on the "Lower Perch" on the Bilsteins, is that a matter of just sliding them down or do you need to maneuver that spring support plate to that spot? Do the OEM springs commonly fail around 100k? Planned on going OEM struts and Tein springs, but when I pulled the struts...
I'm looking at going with a double din and stock amps and speakers. I'm going with the SOS wire harness that is recommended for my application. I have never done anything with the radio so I'm a bit confused. The back of my double din looks like this.
Do I eliminate something here and...
Anyone having problems(noise, static etc) with after market head unit with the stock speakers and amp? Looking at going with a double din and SOS wiring harness.
Thanks
What is the max size after market deck that will fit when going with a double din radio? I see quite a few people are going with a 6.1". Those of you that have gone that route, did you cut the console yourself or have the installers do it?
Is there a height threshold that would require the use of a camber kit? I'm looking at lowering about 1" to 1.5", would that require the camber kit?
I know I should get an alignment done after though.
Thanks for the info
I'm looking at lowering with stock springs on Bilsteins on the lower perch. Are these the correct shocks?
http://www.eshocks.com/bil_veh.asp?Model_Index=2q18&SubChar=q&Manf=Bilstein
Thanks
Finally getting my AP-X turbo kit installed. Have AEM EMS. With a learning curve when it deals with turbo systems, I'm not sure what I need ,so I gotta ask. Don't want to put a bunch of gauges in the dash/console area so I'm looking at this wireless system. Is this enough? Am I looking in the...
Took the liner off of the rear driver's side wheel well to run a return for my turbo kit. All of the plastic little button/rivets or screw broke. Checked the manual and can't find a part description or number. Help would be appreciated.
Thanks
Installed new wheels and thinking about lowering just a bit. Want to be as close to OEM ride as possible and would like something not too $$$$. Does camber come into play regardless of height? Advice please.
Thanks
I was reading some of the forums and find that a few people are or have had issues with FIC. Is the AEM EMS a better system? Is the AEM EMS not used as often and therefore less issues reported? I'm going with the AP-X with the EMS. Are there specific "must have" sensors with the system?
Thanks
Does anyone have directions/suggestions on how to instal the Angus turbo kit? I'm getting one in a few weeks and want to read up on it. I've been told that it is very user friendly and strait forward but I would like to get familiar with it before I start.
Thanks
What is the name or type of connector that goes into the base of the ipod and has a round end on the opposite side? It is flat on the ipod side and has 8 pins on the other, I think. Need to replace it for my USA Spec.
Thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.